aka @JWBananas@startrek.website aka @JWBananas@lemmy.world aka @JWBananas@kbin.social

  • 0 Posts
  • 12 Comments
Joined 1 year ago
cake
Cake day: June 14th, 2023

help-circle
  • And without the context that the Ars article provides, that information means very little to the casual visitor. There is absolutely nothing on that website to provide any of that context. It certainly doesn’t say that by uploading your photo, you are agreeing to allow Google an irrevocable licence to use it to train AI.

    The only thing there is an image that says “Take control” which just links to the author’s cloud storage company. This whole thing is thinly-veiled viral marketing.







  • Let’s be realistic. How many devices support a mainline version of OpenWRT and have more than one 2.5 Gbe port?

    This thing is primarily a wifi router and access point. The available Ethernet ports, which are limited to what the chipset supports, are going to be more than sufficient for the majority of users.

    If your main concern is wired throughput to the Internet, you are not the target audience for OpenWrt. The literal point of the OpenWrt project was to be an open source firmware for the WRT54G wireless router. The project has of course grown since then, but that is still its primary intended use case.

    You are much more likely to find what you need in pfSense/OPNsense/etc, and on more powerful hardware. I would be way more concerned with the fact that it only has 1 GB RAM.

    But if you still want to take that stance, there is nothing stopping you from reconfiguring the 2.5 Gbe port as a VLAN trunk and hanging it off a managed switch. Put your uplink in one VLAN and your LAN in another. That is going to be more than sufficient to saturate the 1 Gbps fiber connection that most people have (or at least asymmetrically saturate the 2 Gbps connection that some people have).

    Or if you don’t like that, just do the routing on the switch. If your primary concern is wired throughput, you’ll probably already be doing that anyway. Then just use this thing as an AP, in which case the one port is sufficient.